CJC 1295

The content, articles and product information provided on this website are strictly educational and informational. They are intended to be used for in vitro research only. “In vitro” is a Latin phrase, “in glass,” that refers to research that is conducted outside of a living organism. Note, these products are not pharmaceuticals or medicines and have not been approved by the FDA for the diagnosis, treatment or prevention of any illnesses or disorders. These products are legally prohibited from human or animal consumption.

  1. What Ipamorelin Is: The Pentapeptide vs GHRP-2 and GHRP-6

    The content, articles and product information provided on this website are strictly educational and informational. They are intended to be used for in vitro research only. “In vitro” is a Latin phrase, “in glass,” that refers to research that is conducted outside of a living organism. Note, these products are not pharmaceuticals or medicines and have not been approved by the FDA for the diagnosis, treatment or prevention of any illnesses or disorders. These products are legally prohibited from human or animal consumption.

    “GHRP” is a family nickname. It is not a structure.

    Ipamorelin is a five-residue synthetic peptide, sequence Aib-His-D-2-Nal-D-Phe-Lys-NH2, formula C38H49N9O5, mass 711.9 g/mol, CAS 170851-70-4. The catalog listing is a 5 mg lyophilized vial. GHRP-2 (~818 Da), GHRP-6 (~873 Da), and hexarelin (~887 Da) are hexapeptides. Those masses do not overlap. A competent ESI-MS reading will assign

    Read more »
  2. CJC-1295 with DAC vs without DAC: Two Different Molecules

    The content, articles and product information provided on this website are strictly educational and informational. They are intended to be used for in vitro research only. “In vitro” is a Latin phrase, “in glass,” that refers to research that is conducted outside of a living organism. Note, these products are not pharmaceuticals or medicines and have not been approved by the FDA for the diagnosis, treatment or prevention of any illnesses or disorders. These products are legally prohibited from human or animal consumption.

    The catalog name “CJC-1295” is used for two different molecules. They share a nickname. They do not share a mass.

    CJC-1295 no DAC is Modified GRF(1-29): a tetrasubstituted GHRH(1-29) amide, formula C152H252N44O42, mass 3367.9 g/mol, CAS 863288-34-0, listed as a 2 mg lyophilized vial. CJC-1295 with DAC is that same b

    Read more »
  3. GHRP-2: The Potent Growth Hormone Releasing Peptide, Explained

    GHRP-2 sits alongside GHRP-6 as one of the classic growth-hormone-releasing peptides, and it's often characterized in research as one of the more potent GH-releasers in the class. This overview covers what it is, how it works, how it compares to its siblings, and how to judge quality.

    This article is for educational and research reference only. It is not medical advice, and Pinnacle materials are sold for laboratory and research use.

    What GHRP-2 is

    GHRP-2 is a growth-hormone-releasing peptide — a small synthetic peptide that stimulates growth hormone release via the ghrelin receptor (GHS-R), the same pathway as the rest of the GHRP class and distinct from the GHRH analogs.

    How it works

    GHRP-2 binds the GHS-R on the pituitary and prompts a pulse of growth hormone. In research it's noted as a potent GH-releaser. Because it acts on the ghrelin receptor, it produces some a

    Read more »
  4. GHRP-6: The Appetite-Linked Growth Hormone Releasing Peptide

    GHRP-6 is one of the original growth-hormone-releasing peptides, and it's best known in research for a distinctive side effect: a strong stimulation of appetite. Understanding that trait is key to understanding how it differs from newer, more selective secretagogues. This overview covers what it is, how it works, how it compares to related peptides, and how to judge quality.

    This article is for educational and research reference only. It is not medical advice, and Pinnacle materials are sold for laboratory and research use.

    What GHRP-6 is

    GHRP-6 is a growth-hormone-releasing peptide — a synthetic hexapeptide (six amino acids) that stimulates growth hormone release. Like the rest of the GHRP class, it works through the ghrelin receptor (the growth hormone secretagogue receptor, GHS-R), a different pathway from the GHRH analogs.

    How it works

    GHRP-6 binds the GHS-R and triggers a pulse of growth hormone. Because this is the ghrelin receptor — and ghrelin is the body's primary hunger signal — GHRP-6 also produces a pronounced appetite response in research models. That appetite effect is its signature and the main thing distinguishing it from the more selective peptides in the family.

    GHRP-6 also tends to produce more off-target hormonal activity (such as cortisol and prolactin) than the newer, cleaner secretagogues. Growth hormone released this way drives IGF-1 downstream, as with the rest of the class

    Read more »
  5. How to Reconstitute Sermorelin + GHRP-6 Blend: Step-by-Step Lab Protocol

    How to Reconstitute Sermorelin + GHRP-6 Blend: Step-by-Step Lab Protocol

    The Sermorelin + GHRP-6 Blend (2mg/2mg per vial) combines Sermorelin — the 29-amino acid GHRH(1-29)NH2 GHRH-R reference agonist — with GHRP-6, a first-generation GHSR-1a agonist, co-lyophilised in a single 10mL sterile glass vial. This blend supports comparative GH axis pharmacology research using native-sequence GHRH analogue (sermorelin) paired with GHSR-1a activation, providing mechanistically authentic upstream GH axis dual-receptor stimulation data.

    Materials Required

    • Sermorelin + GHRP-6 Blend 2mg/2mg lyophilised vial
    • Bacteriostatic water (BAC water) — 10mL vial
    • 1mL sterile syringe with needle
    • Alcohol swabs (70% isopropyl)
    • Nitrile gloves
    • Permanent marker for labelling

    Pre-Reconstitution Preparation

    Inspect the vial for intact lyophilised powder and unbroken seal. Allow to equilibrate to room tempe

    Read more »
  6. How to Reconstitute CJC-1295 + Ipamorelin Blend: Laboratory Reconstitution Protocol

    How to Reconstitute CJC-1295 + Ipamorelin Blend: Laboratory Reconstitution Protocol

    The CJC-1295 + Ipamorelin Blend (2mg/2mg per vial) combines CJC-1295 No DAC (GHRH-R agonist) and Ipamorelin (GHSR-1a agonist) co-lyophilised in a single 10mL sterile glass vial. This is the most commonly used dual GH axis blend in research settings due to ipamorelin's exceptional GHSR-1a selectivity, which produces clean, attributable receptor pharmacology data without the off-target corticotroph and lactotroph activity seen with GHRP-2 and GHRP-6.

    Materials Required

    • CJC-1295 + Ipamorelin Blend 2mg/2mg lyophilised vial
    • Bacteriostatic water (BAC water) — 10mL vial
    • 1mL sterile syringe with needle
    • Alcohol swabs (70% isopropyl)
    • Nitrile gloves
    • Permanent marker for labelling

    Pre-Reconstitution Preparation

    Inspect the vial for intact lyophilised powder and unbroken seal. Allow to equilibrate to room t

    Read more »
  7. How to Reconstitute CJC-1295 + GHRP-6 Blend: Step-by-Step Lab Guide

    How to Reconstitute CJC-1295 + GHRP-6 Blend: Step-by-Step Lab Guide

    The CJC-1295 + GHRP-6 Blend (2mg/2mg per vial) contains CJC-1295 No DAC (GHRH-R agonist) and GHRP-6 (GHSR-1a agonist) co-lyophilised in a single 10mL sterile glass vial. This blend provides simultaneous upstream GHRH-R and GHSR-1a receptor pathway activation in a single compound preparation, supporting dual-target GH axis research in pituitary somatotroph and GH axis cell model systems.

    Materials Required

    • CJC-1295 + GHRP-6 Blend 2mg/2mg lyophilised vial
    • Bacteriostatic water (BAC water) — 10mL vial
    • 1mL sterile syringe with needle
    • Alcohol swabs (70% isopropyl)
    • Nitrile gloves
    • Permanent marker for labelling

    Step-by-Step Reconstitution Protocol

    Step 1 — Prepare workspace. Wipe work surface with 70% isopropyl alcohol. Allow to dry. Wear nitrile gloves.

    Step 2 — Swab both stoppers.

    Read more »
  8. How to Reconstitute CJC-1295 + GHRP-2 Blend: Laboratory Protocol Guide

    How to Reconstitute CJC-1295 + GHRP-2 Blend: Laboratory Protocol Guide

    The CJC-1295 + GHRP-2 Blend (2mg/2mg per vial) is a pre-combined lyophilised research compound containing CJC-1295 No DAC (Modified GRF 1-29, GHRH-R agonist) and GHRP-2 (GHSR-1a agonist) co-lyophilised in a single 10mL sterile glass vial. This dual-peptide blend enables simultaneous GHRH-R and GHSR-1a receptor activation in a single reconstitution, supporting synergistic GH axis cell model research from one vial preparation.

    Materials Required

    • CJC-1295 + GHRP-2 Blend 2mg/2mg lyophilised vial
    • Bacteriostatic water (BAC water) — 10mL vial
    • 1mL sterile syringe with needle
    • Alcohol swabs (70% isopropyl)
    • Nitrile gloves
    • Permanent marker for labelling

    Pre-Reconstitution Preparation

    Both peptides in this blend — CJC-1295 No DAC and GHRP-2 — are freely soluble in BAC water and have been co-lyophilised to produce a hom

    Read more »
  9. How to Reconstitute CJC-1295 With DAC: Laboratory Reconstitution Guide

    How to Reconstitute CJC-1295 With DAC: Laboratory Reconstitution Guide

    CJC-1295 with DAC (Drug Affinity Complex, MW 3647.3 g/mol, CAS 863288-34-0) is a synthetic GHRH analogue incorporating a maleimidoproprionic acid (MPA) modification at Lys30 that enables covalent albumin binding via thiol-maleimide conjugation, producing extended GHRH-R engagement in research models. It is supplied as a lyophilised white powder in a 10mL sterile glass vial containing 2mg of peptide. The DAC albumin-binding modification requires specific considerations during reconstitution and cell model assay design to ensure accurate pharmacology data.

    Materials Required

    • CJC-1295 with DAC 2mg lyophilised vial
    • Bacteriostatic water (BAC water) — 10mL vial
    • 1mL sterile syringe with needle
    • Alcohol swabs (70% isopropyl)
    • Nitrile gloves
    • Permanent marker for labelling
    • Refrigerator at 2–8°C for storage

    Pre-Reconstitution Prep

    Read more »
  10. How to Reconstitute CJC-1295 Without DAC: Step-by-Step Lab Protocol

    How to Reconstitute CJC-1295 Without DAC: Step-by-Step Lab Protocol

    CJC-1295 without DAC (Modified GRF 1-29, Mod GRF 1-29, MW 3367.9 g/mol) is a stabilised synthetic GHRH analogue incorporating four amino acid substitutions — Ala2→D-Ala, Gln8→Ala, Ala15→Ala, Leu27→Leu — that confer resistance to DPP-IV and endopeptidase cleavage without the drug affinity complex (DAC) albumin-binding modification found in CJC-1295 with DAC. It is supplied as a lyophilised white powder in a 10mL sterile glass vial containing 2mg of peptide. Proper reconstitution ensures accurate working concentrations for GHRH-R receptor pharmacology and GH axis cell model research.

    Materials Required

    • CJC-1295 No DAC 2mg lyophilised vial
    • Bacteriostatic water (BAC water) — 10mL vial
    • 1mL sterile syringe with needle
    • Alcohol swabs (70% isopropyl)
    • Nitrile gloves
    • Permanent marker for labelling
    • Refrigerator at 2–8°C for storage
    Read more »
Page
DISCLAIMER: The products sold on this site are not a drug nor is it intended to treat, diagnose, cure or prevent any disease, nor is it meant for ANY cosmetic purpose. Pinnacle Peptides makes no claims of alleged beneficial properties of any product on this site if injected or ingested in any manner. Our Peptides are exclusively distributed legally within the laws of safe harbor for research peptides and are to be used for that purpose ONLY. If any country’s governing bodies feel we are in violation of their laws regarding peptides, we ask you contact us immediately via service@pinnaclepeptides.com so we may expeditiously rectify the situation.All customers represent and warrant that through their own review and study that they are fully aware and knowledgeable about the following:Their government regulations regarding the importation, purchase, possession and use of peptides. The health and safety hazards associated with the handling of peptides in a research setting. That peptides are NOT intended to be used as a food additive, drug, vitamin, supplement, cosmetic or any other inappropriate application. Such a sale would be otherwise denied.
Pinnacle Peptides is a chemical supplier. Pinnacle Peptides is not a compounding pharmacy or chemical compounding facility as defined under 503A of the Federal Food, Drug, and Cosmetic act. Pinnacle Peptides is not an outsourcing facility as defined under 503B of the Federal Food, Drug, and Cosmetic act.